San Diego Fleck Water Softeners

Trusted and Reliable

San Diego Fleck Water Softeners

Eliminate lime scale build-up on pipes, fixtures and water heaters in homes and businesses. Reduce detergent use up to 70% and Increase water heater efficiency by as much as 29% for gas or 22% for electric. Get cleaner, softer clothes while reducing appliance and plumber service costs. Choose one of 3 sizes up to 60,000 grain removal.

Features
• Ion exchange for hardness mineral removal
• Uses Purolite 40-70 mesh resin for low salt use and minimum brine discharge<
• On-Demand metered regeneration meets California requirements
• Proven Fleck valve provides reliable control
• 3 sizes for most home requirements 1.0, 1.5, 2.0 cu. ft. resin capacity

Model Number 948SXT 1054SXT 1252SXT 1035CSE
Applications small homes & condos average home luxury homes for limited space
Nominal Resin Capacity* 1.0 Cu. Ft. 1.5 cu. Ft. 2.0 Cu. Ft. 1.0 Cu. Ft.
Hardness Removal max grains 30,000 45,000 60,000 30,000
Nominal System Flow
@50 psi, 15 psig drop
11.6 gpm 11.6 gpm 19.7 gpm 9.5 gpm
Softener Tank Size 9″dia x 48″ high 10″dia x 54″high 12″dia x 52″high 12″w x 21″d x 45″h
Brine Tank Size 18″ dia. x 33″ high 18″ dia. x 33″ high 18″dia. x 40″high
Type Control Valve Fleck 5600SXT Fleck 5600SXT Fleck 7000SXT Fleck 5600SXT
Pipe Sizes inlet, 3/4″ mpt
drain, 1/2″ fpt
brine, 3/8″ tube
inlet, 3/4″ mpt
drain, 1/2″ fpt
brine, 3/8″ tube
inlet, 1.25″ mpt
drain, 1/2″ fpt
brine, 3/8″ tube
inlet, 3/4″ mpt
drain, 1/2″ fpt
Fittings Noryl Yoke mpt SS bypass valve, fpt Noryl bypass w/1″ mpt or sweat Noryl Yoke mpt or sweat
Power Supply 110 VAC 24 VAC 24 VAC 24 VAC
Weight, Pounds 95 125 180 85
Overall Dimensions H-56″, W-27″, D-15″ H-62″, W-28″, D-16″ H-62″, W-30″, D-17″ H-45″, W-12″, D-24″
Conditions of Use: Water must be microbiologically safe; System pressure, 20 min to 100 max psi; Temperature, 40 to 100°

Technical data from Vertex Water Products

Contact Pure Water Health (858) 292-1098
for sales, service or parts of San Diego Fleck Water Softeners